Keyword Search:     GO 
site map | inquiry
HOME POLLUTION ABATEMENT ENGINE RELATED CONTACT US SERVICE
Pollution Abatement
Bilge Separator
Bilge Alarm
Skimmers
Polishing Filter
Trash compactors
Ballast Water
Fast-Breaking Cleaner
Sewage Treatment
Engine Related
Viscosity Control
Engine Analyzer
Oil Mist Detector
Service
Bilge Assessments
Efficiency Assessments
Graviner Mark 6 Service
Bilge Alarm Calibration
Engine Related - Oil Mist Detector
» Back to Engine Related products
GRAVINER-OIL MIST DETECTION
 
Graviner pioneered Oil Mist Detection over 50 years ago. The new Mark-6 brings oil mist detection into the 21st century.
 
Graviner started shipping the new Mark-6 oil mist detector in 2001. With this unit, Graviner maintains the lead in reliable oil mist detection.
 
The MK-6 OMD uses individual sensor heads at each crankcase space. For each engine the sensors are connected through a connection box to the central monitoring unit. The MK-6 central processor can support up to 64 sensors on multiple engines or as engine room monitors.
 
Oil Mist Detectors (OMD’s) are required by class for UMS installations with large diesel engines. At Hermont, we believe that the Graviner MK-6 is also a very cost-effective engine condition-monitoring device. The OMD samples the oil mist level in the crankcase space and with it monitors for hot spots. Rather than using sensors to read temperature rise, the monitor uses changes in oil mist concentration to spot a temperature rise in a cylinder compartment. This makes the Graviner OMD an economical condition monitoring system for bearings, crankshaft, liners, pistons and piston rings.
By preventing a crankcase explosion, the Graviner prevents also a catastrophic engine failure.

Advantages

  • Multi-engine capability

  • High scan rate - 64 detectors in 1.1 seconds

  • Complete flexibility - up to 8 engines on a single system

  • Pipe free installation

  • Control unit located in engine control room or other suitable location, connected to detectors via junction boxes

  • Low initial cost and simple to extend

  • No air supply or exctractor fans needed
  • Service techniciens trained by the manufacturer
 
Ask us for a competitive quote.

Telephone: 514-856-1212
Fax: 514-956-1717

Inquire about this product
Hermont Marine © 2017 | Privacy Policy
About Us  |  Services  |  Contact Us